LC Resonance Calculator
Calculate the resonant frequency, characteristic impedance, Q factor, and bandwidth of a series or parallel LC tank circuit. Enter inductance, capacitance, and optional series resistance.
Formula
f_0 = \frac{1}{2\pi\sqrt{LC}}, \quad Z_0 = \sqrt{\frac{L}{C}}, \quad Q = \frac{Z_0}{R}
Reference: Terman, Radio Engineers' Handbook, McGraw-Hill, 1943
How It Works
LC resonance is a fundamental phenomenon in electrical engineering where an inductor (L) and capacitor (C) form an oscillating circuit with a specific natural frequency. At resonance, the reactive impedances of the inductor and capacitor cancel each other out, creating a unique condition where the circuit exhibits maximum energy transfer or filtering characteristics. The resonant frequency depends inversely on the square root of the inductance and capacitance product, making it sensitive to component selection. In practical RF and telecommunications applications, LC tanks are crucial for frequency selection, signal filtering, and impedance matching in communication systems, oscillators, and bandpass filters.
Worked Example
Consider designing a bandpass filter for a 915 MHz ISM band radio transceiver. Using the LC resonance calculator, select a capacitor of 100 pF and solve for the required inductor. Calculating f0 = 1/(2π√LC), we first rearrange to L = 1/(4π²f0²C). Plugging in 915 MHz and 100 pF gives an inductor value of approximately 27.8 nH. The circuit's characteristic impedance Z0 would be √(L/C) ≈ 50 Ω, which conveniently matches standard RF transmission line impedance.
Practical Tips
- ✓Use low-loss, high-Q components for narrower bandwidth filters
- ✓Consider temperature-compensated capacitors for stable frequency performance
- ✓Validate theoretical calculations with network analyzer measurements
Common Mistakes
- ✗Neglecting parasitic resistances that reduce Q-factor performance
- ✗Failing to account for component tolerances in precise frequency tuning
- ✗Overlooking temperature coefficients of capacitors and inductors
Frequently Asked Questions
What is Q-factor in LC circuits?
Q-factor represents the circuit's energy storage efficiency, indicating how sharply the resonance behaves. Higher Q values mean narrower, more selective frequency responses.
How does temperature affect LC resonance?
Component values change with temperature, causing frequency drift. Selection of temperature-stable components is critical for maintaining precise resonance.
Can I use this calculator for filter design?
Yes, the LC resonance calculator is fundamental for designing bandpass, lowpass, and highpass filters in RF and communication systems.
What's the practical frequency range for LC tanks?
LC tanks are practical from audio frequencies (few Hz) to microwave ranges (several GHz), depending on component selection and implementation.
How do I minimize losses in an LC circuit?
Use high-Q inductors and capacitors, minimize parasitic resistances, and consider using surface-mount components with shorter signal paths.
Related Calculators
General
RC Time Constant
Calculate RC circuit time constant τ, charge time to 63.2% and 99%, and −3dB cutoff frequency. Essential for filter and timing circuit design.
Signal
Filter Designer
Design passive RC and LC Butterworth low-pass, high-pass, and band-pass filters. Calculates component values (C, L), time constant, and attenuation for filter orders 1 through 4.
General
Series/Parallel R·C·L
Calculate the equivalent series and parallel combination of up to four resistors, capacitors, or inductors. Also computes the voltage divider ratio for two-resistor networks.
RF
Coax Impedance
Calculate coaxial cable characteristic impedance, capacitance, inductance per unit length, and cutoff frequency from inner/outer conductor dimensions and dielectric.
General
Ohm's Law
Calculate voltage, current, resistance, and power using Ohm's Law. Enter any two values to solve for the remaining two quantities.
General
Color Code
Decode resistor color bands to resistance value and tolerance. Supports 4-band, 5-band, and 6-band resistors. Instant color band to ohms conversion.